BLNMG - TYPE I BLACK BULK PAINT

  • MSDS: BLNMG
  • Manufacturer: NELSON PAINT CO
  • Product Name: TYPE I BLACK BULK PAINT
  • National Stock Number: 8010-01-273-3766
Product Identification

Product ID:TYPE I BLACK BULK PAINT
MSDS Date:06/01/1991
FSC:8010
NIIN:01-273-3766
MSDS Number: BLNMG

Responsible Party
NELSON PAINT CO
ONE NELSON DRIVE
KINGSFORD, MI 49801
US

Emergency Phone: 800-255-3924

Info Phone: 906-774-5566

Preparer: GEORGE MCBILLIROY

Cage: 17833

Contractor
NELSON PAINT CO OF MICHIGAN INC
2040 KINGSFORD, MI 49802-2040 US

Telephone: 906-774-5566

Cage: 17833

Ingredients

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 48%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DROWSINESS, DIZZINESS, FATIGUE,
LOSS OF COORDINATION. CHRONIC: STUDIES HAVE SHOWN REPEATED
PROLONGED OVEREXPOSURE TO SOLVENTS MAY RESULT IN BRAIN & CENTRAL
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN DISORDERS, IMPAIRED LUNG
FUNCTION OR ASTHMA LIKE CONDITIONS.

First Aid

First Aid:INHALATION: MOVE VICTIM TO FRESH AIR. ADMINISTER ATIFICIAL
RESPIRATION. EYES: FOR DIRECT CONTACT, FLUSH EYES FOR AT LEAST 15
MIN. WITH CLEAN WATER, SEEK MEDICAL ATTENTION. SKIN: WASH AREA
THOROUGHLY W ITH SOAP & WATER. REMOVE CONTAIMINATED CLOTHING.
INGESTION: DO NOT INDUCE VOMITING/ASPIRATION MAY CAUSE LUNG DAMAGE.
GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:101F,38C
Autoignition Temp:Autoignition Temp Text:750F
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:DRY CHEMICAL FOAM, CO2
Fire Fighting Procedures:SCBA RECOMMENDED. SMALL FIRE: EXTINGUISH W/
DRY CHEMICAL, CO2 OR FOAM. LARGE FIRE: DRY CHEMICAL OR FOAM
RECOMMENDED. WATER MAY BE INEFFECTIVE EXTINGUISH AGENT.
Unusual Fire/Explosion Hazard:THIS MATERIAL IS COMBUSTIBLE & MAY BE
IGNITED BY HEAT OR FLAME. THIS MATERIAL WILL BURN, BUT WILL NOT BE
IGNITED READILY. CONTAINERS CAN BURST WHEN HEATED.

Accidental Release

Spill Release Procedures:USE SAND OR OTHER INERT MATERIAL TO DAM &
CONTAIN SPILL, TRANSFER ABSORBENT MATERIAL TO SUITABLE CONTAINER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED, STORE
IN COOL, DRY PLACE AWAY FROM SOURCES OF IGNITION, AVOID SPARKS OR
FLAMES WHEN USING.
Other Precautions:DO NOT INHALE MIST OR VAPOR. APPLY WITH BACK TO WIND.
DO NOT HEAT OR INCINERATE AEROSOL CANS.

Exposure Controls

Respiratory Protection:RESPIRATORY PROTECTION IS ADVISED WHEN
CONCENTRATIONS EXCEED THE ESTABLISHED EXPOSURE LIMITS, USE NIOSH
APPROVED RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:PRODUCT NORMALLY USED OUTSIDE.
Protective Gloves:NITRILE RUBBER GLOVES.
Eye Protection:USE APPROVED EYE PROTECTION.
Other Protective Equipment:CLEAN SOURCE OF WATER SHOULD BE AVAILABLE
FOR FLUSHING EYES.
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:310 TO 390F
Vapor Pres:2.0 MM HG
Vapor Density:<5
Spec Gravity:1.07
pH:NEUTRL
Evaporation Rate & Reference:0.13 (BU AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORED LIQUID, SWEET NAPHTHA
Percent Volatiles by Volume:69

Stability

Stability Indicator/Materials to Avoid:YES
THIS MATERIAL IS INCOMPATIBLE WITH STRONG ACIDS AND BASES, OXIDIZING
AGENTS AND SELECTED AMINES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH FEDERAL,
STATE & LOCAL REGULATIONS, NOT REGULATED UNDER CERCLA: SECTION 102
SARA: (SECTIONS 301-304 AND 311-315).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.